BBA reman forum / BBA reman forum / Problems and Solutions / clio 52 plate intermittant non-start 1.2 16 valve / Latest PostsInstantForum.NET v4.1.2BBA reman forumhttp://www.bba-reman.com/forums/nick.swan@bba-reman.comMon, 15 Mar 2010 03:16:44 GMT20RE: clio 52 plate intermittant non-start 1.2 16 valvehttp://www.bba-reman.com/forums/Topic84196-1-1.aspxThanks for your reply--</P><P>I will check that</P><P>DarcyFri, 03 Jul 2009 07:14:21 GMTphoenixRE: clio 52 plate intermittant non-start 1.2 16 valvehttp://www.bba-reman.com/forums/Topic84196-1-1.aspxDarcey, you could easily take the oil level doubt out of the equation!!<img align="absmiddle" src="http://www.bba-reman.com/forums/Skins/Classic/Images/EmotIcons/Wink.gif" border="0" title="Wink">. Battery voltage on cranking is important on these clio's. If it drops too low whilst cranking the immobiliser instantly clicks in killing the starter relay. Renault have advised there technicians about this problem. Check all earths/power feeds and try a 2nd battery to eliminate fault..Fri, 03 Jul 2009 06:28:10 GMTA.V.Sclio 52 plate intermittant non-start 1.2 16 valvehttp://www.bba-reman.com/forums/Topic84196-1-1.aspxMorning,</P><P>Occasionally will crank but not start</P><P>When it does,it rotates for 4 turns and then stops cranking</P><P>Exactly the same every time</P><P>It a long shot but,it seems this only happens when the car is a little low on oil-</P><P>Is the car clever enough to turn something off if the level is low??</P><P>Regards</P><P>Darcy Fri, 03 Jul 2009 06:12:58 GMTphoenix