BBA-Reman Forums



Transit 2005 F3FA 2.0ltr Duratorq Di

Posted By BDRepairs Monday, October 03, 2011 12:12:50 PM
Add to Favorites0
Author Message
BDRepairs
 Posted Monday, October 03, 2011 12:12:50 PM
Forum Apprentice

Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)

Group: Forum Members
Last Active: Friday, November 30, 2012 8:13:51 AM
Posts: 187, Visits: 398
202
Got this transit in with non start

Code read and P0149, P1563, P1664, P0335 P1631 are logged

Once cleared Codes P1563 and P1664 keep reappearing

Runs on a sniff of brake cleaner then cuts out when you stop spraying

Want to check the wiring and looking to see if anyone has a diagram of the pump wiring so i can check it please.

Monday, October 03, 2011 12:17:52 PM by BDRepairs
Radnorman
 Posted Monday, October 03, 2011 12:43:53 PM
Forum Master Technician

Forum Master Technician - (1,637 reputation)Forum Master Technician - (1,637 reputation)Forum Master Technician - (1,637 reputation)Forum Master Technician - (1,637 reputation)Forum Master Technician - (1,637 reputation)Forum Master Technician - (1,637 reputation)Forum Master Technician - (1,637 reputation)Forum Master Technician - (1,637 reputation)Forum Master Technician - (1,637 reputation)

Group: Advanced Members
Last Active: 2 days ago @ 4:55:11 PM
Posts: 1,511, Visits: 8,680
I would suggest using the search facility of this forum. There is much accumulated fact, speculation, supposition, conjecture and a little 'rubbish' there!

You are not the first in this situation! 

I stand, to be corrected.

BDRepairs
 Posted Monday, October 03, 2011 12:51:30 PM
Forum Apprentice

Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)

Group: Forum Members
Last Active: Friday, November 30, 2012 8:13:51 AM
Posts: 187, Visits: 398
202
Rad

had a look and done a few with the same codes that were poor starts and req new tensioners,  this one

is a non starter suspecting the pump but want to check it before condeming it !

Glow plug light also flashing !

Andy-01
 Posted Monday, October 03, 2011 1:55:08 PM
Forum Technician

Forum Technician - (587 reputation)Forum Technician - (587 reputation)Forum Technician - (587 reputation)Forum Technician - (587 reputation)Forum Technician - (587 reputation)Forum Technician - (587 reputation)Forum Technician - (587 reputation)Forum Technician - (587 reputation)Forum Technician - (587 reputation)

Group: Forum Members
Last Active: 1 hour ago
Posts: 555, Visits: 2,290
587
P1553 & P1664 are classic pump failure codes.

BUT, being a front wheel drive they dook like to chafe the pump wiring loom in the area of the starter motor. Check carefully first !

BDRepairs
 Posted Monday, October 03, 2011 2:36:03 PM
Forum Apprentice

Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)

Group: Forum Members
Last Active: Friday, November 30, 2012 8:13:51 AM
Posts: 187, Visits: 398
202
Thanks Andy

Wiring is good not tight or been rubbing on anything.live and earths ok.

dave_1
 Posted Tuesday, October 04, 2011 11:20:18 AM
Forum Master Technician

Forum Master Technician - (2,329 reputation)Forum Master Technician - (2,329 reputation)Forum Master Technician - (2,329 reputation)Forum Master Technician - (2,329 reputation)Forum Master Technician - (2,329 reputation)Forum Master Technician - (2,329 reputation)Forum Master Technician - (2,329 reputation)Forum Master Technician - (2,329 reputation)Forum Master Technician - (2,329 reputation)

Group: Advanced Members
Last Active: 2 days ago @ 5:19:00 PM
Posts: 2,121, Visits: 13,438
Hi
Sounds like its time to change the pumpWink

Dave
BDRepairs
 Posted Wednesday, October 05, 2011 8:06:06 AM
Forum Apprentice

Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)

Group: Forum Members
Last Active: Friday, November 30, 2012 8:13:51 AM
Posts: 187, Visits: 398
202
New pump is on the way Smile
BDRepairs
 Posted Thursday, October 06, 2011 4:54:05 AM
Forum Apprentice

Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)Forum Apprentice - (202 reputation)

Group: Forum Members
Last Active: Friday, November 30, 2012 8:13:51 AM
Posts: 187, Visits: 398
202
Got a reman Bosch pump fitted Pump (not coded) did ign on 30secs and off as per diesel shop advice, Checked crank/pump timing all ok

Tried to start and No go Ermm

No fault codes have came back and the glow plug light is now not flashing ?

Its not the quietest turning over maybe chain/tensioner issues ?

Any ideas guys

Thursday, October 06, 2011 4:54:54 AM by BDRepairs
K And R
 Posted Thursday, October 06, 2011 9:44:03 AM
Forum Master Technician

Forum Master Technician - (13,259 reputation)Forum Master Technician - (13,259 reputation)Forum Master Technician - (13,259 reputation)Forum Master Technician - (13,259 reputation)Forum Master Technician - (13,259 reputation)Forum Master Technician - (13,259 reputation)Forum Master Technician - (13,259 reputation)Forum Master Technician - (13,259 reputation)Forum Master Technician - (13,259 reputation)

Group: Moderators
Last Active: 23 minutes ago
Posts: 11,741, Visits: 69,265
BDR

I would have fitted a genuine ford pump. I have known of pump,s pulley being put on 180 out, that is the pump pulley and not the chain pulley that bolts to it.

Kev.

"If you dont KNOW how it works, don,t try to test or fix it"

dave_1
 Posted Thursday, October 06, 2011 4:41:39 PM
Forum Master Technician

Forum Master Technician - (2,329 reputation)Forum Master Technician - (2,329 reputation)Forum Master Technician - (2,329 reputation)Forum Master Technician - (2,329 reputation)Forum Master Technician - (2,329 reputation)Forum Master Technician - (2,329 reputation)Forum Master Technician - (2,329 reputation)Forum Master Technician - (2,329 reputation)Forum Master Technician - (2,329 reputation)

Group: Advanced Members
Last Active: 2 days ago @ 5:19:00 PM
Posts: 2,121, Visits: 13,438
Hi
I have used the bosch ones that are virgin pump that code it like that.
Have you bleed the system?

Could be a chain tensioner problem?

Dave

Reading This Topic

Expand / Collapse

Back To Top