|
dbm
|
Posted 4/27/2012 4:28:15 PM
|
|
Group: Awaiting Activation
Last Active: 4/10/2013 3:29:48 PM
Posts: 37,
Visits: 286
|
hi every one
i have a problem with a peugeot 106 1.1 idependence 2001 just got the car back from m.o.t today ands its failed on emissions,Ive been advised on a new 02 sensor or cat needed,Ive had a look at it tonight and in live data it has no volts on upstream or downstream sensor using ethos scanner and no codes stored,Ive checked for volts at the upstream sensor and on all 4 wires the volts are going up and down fast from 0.8 - 16v. i am not sure on what fuse the o2 sensors use as my diagram says its f11 but i have no fuse or wires at f11
|
|
|
|
|
K And R
|
Posted 4/27/2012 5:21:07 PM
|
|
Group: Moderators
Last Active: 4 minutes ago
Posts: 10,085,
Visits: 36,515
|
D
I think you need to double check you equipment. Scope the sensor.
Kev.
"If you dont KNOW how it works, don,t try to test or fix it"
|
|
|
|
|
dbm
|
Posted 4/27/2012 6:04:42 PM
|
|
Group: Awaiting Activation
Last Active: 4/10/2013 3:29:48 PM
Posts: 37,
Visits: 286
|
thanks for the reply
unfortunately i don't have a scope and basic equipment scanner will only work on eobd
|
|
|
|
|
K And R
|
Posted 4/27/2012 6:32:55 PM
|
|
Group: Moderators
Last Active: 4 minutes ago
Posts: 10,085,
Visits: 36,515
|
d
"0.8 - 16v"
16 volts  get some-one with suitable equipment to do some tests.
Kev.
"If you dont KNOW how it works, don,t try to test or fix it"
|
|
|
|
|
CYRIL
|
Posted 4/28/2012 4:14:39 AM
|
|
Group: Moderators
Last Active: 7 hours ago
Posts: 4,027,
Visits: 5,137
|
and the GASES WHAT WERE THEY
Regards Cyril
|
|
|
|
|
dbm
|
Posted 4/28/2012 7:30:13 AM
|
|
Group: Awaiting Activation
Last Active: 4/10/2013 3:29:48 PM
Posts: 37,
Visits: 286
|
fast idle
co 0.039
lambda 1.046
second fast idle
co 0.458
lambda 1.218
natural idle
co 0.265
|
|
|
|
|
mac123
|
Posted 4/28/2012 10:02:39 AM
|
|
Group: Forum Members
Last Active: 5/12/2013 11:01:18 AM
Posts: 135,
Visits: 480
|
check for an exhaust blow,even a slight one will send the lambda readings out
|
|
|
|
|
dbm
|
Posted 4/28/2012 10:52:43 AM
|
|
Group: Awaiting Activation
Last Active: 4/10/2013 3:29:48 PM
Posts: 37,
Visits: 286
|
i will double check for a exhaust blow
i think i need some one that can check it out properly
|
|
|
|
|
CYRIL
|
Posted 4/29/2012 3:48:10 AM
|
|
Group: Moderators
Last Active: 7 hours ago
Posts: 4,027,
Visits: 5,137
|
no CO2 or HC or o2 Then ah well can't help.
Regards Cyril
|
|
|
|