|
barney08
|
Posted 6/8/2012 9:02:11 AM
|
|
Group: Forum Members
Last Active: 6/18/2012 11:16:56 AM
Posts: 3,
Visits: 13
|
I have a peugeot 406 lx 2.o hdi
the problem i have is the screen says anti pollution defect it keept cutting out when ideal had some one out to code read it
code came back as p1176 description fuel regulator agreement
my mechanic drained of fuel and cleaned fuel filter and put back to getheragain he said he will change fuel fitter next weeek
now my car starts and drives ok but when you start it it still comes up anti pollution defec and management light comes on then gose of after about 2 mins also the management light occasionally comes on for about 5 mins then gose of when driveing
other codes that came back are
p0480 cooling fan 1 control circuit malfunction
p0483 cooling fan rationality check malfunction
p0336 crankshaft position sensor a circuit range/performance
p0226 throttle/pedal position sensor/switch c circuit range/performance problem
has any one any advice or surgestions please
|
|
K And R
|
Posted 6/8/2012 10:42:00 AM
|
|
Group: Moderators
Last Active: 4 hours ago
Posts: 10,093,
Visits: 36,723
|
Barney
Welcome to the BBA Forum 
Year, and engine code will help. oh and code reader used.
"my mechanic drained of fuel and cleaned fuel filter and put back to getheragain he said he will change fuel fitter next weeek"
hmm. not good practice on HDI,s, there is a set routine of cleaning and disconnection the pipes to the canister, and always renew the whole canister, failure to do so often results in blocking the injectors.
Kev.
"If you dont KNOW how it works, don,t try to test or fix it"
|
|
barney08
|
Posted 6/8/2012 2:43:16 PM
|
|
Group: Forum Members
Last Active: 6/18/2012 11:16:56 AM
Posts: 3,
Visits: 13
|
year 2002
fault codes diesel (rhy (vin 6-8 = engine code) - siemens sid 801-mt/at)
dtc description
p 0480 - cooling fan 1 control circuit malfunction
p 0483 - cooling fan rationality check malfunction
p 1176 - fuel regulator agreement
p 0336 - crankshaft position sensor a circuit range/performance
p 0226 - throttle/pedal position sensor/switch c circuit range/performance problem
|
|
tk
|
Posted 6/8/2012 7:02:23 PM
|
|
Group: Forum Members
Last Active: 4/23/2013 5:35:44 PM
Posts: 285,
Visits: 1,409
|
Hello barney,
Did your mechanic check low pressure system pressure after the filtre with a pressure gauge?or is he just quessing that the filtre is blocked?
|
|
barney08
|
Posted 6/9/2012 1:42:12 PM
|
|
Group: Forum Members
Last Active: 6/18/2012 11:16:56 AM
Posts: 3,
Visits: 13
|
he saidy the filter was full of a blue bittey stuff
|
|
K And R
|
Posted 6/9/2012 2:16:39 PM
|
|
Group: Moderators
Last Active: 4 hours ago
Posts: 10,093,
Visits: 36,723
|
tk
seimens system.
Barney.
blue bits (steel frag ? ) i don,t think your mechanic knows much about HDI,s. Has he serviced this vechicle ?
Kev.
"If you dont KNOW how it works, don,t try to test or fix it"
|
|
Tismot
|
Posted 6/9/2012 3:04:38 PM
|
|
Group: Forum Members
Last Active: 4 hours ago
Posts: 525,
Visits: 707
|
Get the vehicle looked at by a proper technician with the right training and equipment.
Modern cars, Its all wizardery and witchcraft
6/9/2012 3:05:27 PM by
Tismot
|