|
mac123
|
Posted 6/16/2012 12:33:31 PM
|
|
Group: Forum Members
Last Active: 5/12/2013 11:01:18 AM
Posts: 135,
Visits: 480
|
i posted earlier in the week about this car with the lambda code,no more lights on dash or codes in the ecu but found that the linkage on the swirl valve is broken,i know these are common but never actually done one,has anyone got a labour time on the inlet manifold change and what sort of job are they to do??....z19dth 150 bhp.
|
|
|
|
|
markt
|
Posted 6/16/2012 12:41:19 PM
|
|
Group: Forum Members
Last Active: 2/24/2013 9:41:50 AM
Posts: 81,
Visits: 221
|
autodata shows 3.4 hours...so add another hour on top of that for awkward bolts/nuts and fitting plasters.lol.
IS the customer always right 
|
|
|
|
|
mac123
|
Posted 6/16/2012 12:46:55 PM
|
|
Group: Forum Members
Last Active: 5/12/2013 11:01:18 AM
Posts: 135,
Visits: 480
|
sounds like a nice job then.lol.
|
|
|
|
|
K And R
|
Posted 6/16/2012 12:57:46 PM
|
|
Group: Moderators
Last Active: 2 hours ago
Posts: 10,085,
Visits: 36,532
|
Mac
Factor in new T/belt kit and water pump.
Kev.
"If you dont KNOW how it works, don,t try to test or fix it"
|
|
|
|
|
mac123
|
Posted 6/16/2012 1:01:04 PM
|
|
Group: Forum Members
Last Active: 5/12/2013 11:01:18 AM
Posts: 135,
Visits: 480
|
kev
yes im goin to put a belt and water pump on at the same time,is it hp pump off to do the job?
mac
|
|
|
|
|
K And R
|
Posted 6/16/2012 1:21:02 PM
|
|
Group: Moderators
Last Active: 2 hours ago
Posts: 10,085,
Visits: 36,532
|
Mac
Yes.
Kev.
"If you dont KNOW how it works, don,t try to test or fix it"
|
|
|
|
|
mac123
|
Posted 6/16/2012 1:34:20 PM
|
|
Group: Forum Members
Last Active: 5/12/2013 11:01:18 AM
Posts: 135,
Visits: 480
|
sounds like an expensive job
|
|
|
|
|
mac123
|
Posted 6/19/2012 5:02:39 PM
|
|
Group: Forum Members
Last Active: 5/12/2013 11:01:18 AM
Posts: 135,
Visits: 480
|
im doing this job at the weekend,ive ordered the new manifold but im getting diffrent stories on the manifold actuator,can i use the original one thats on the car or do i need to replace??cars done 40k...cheers
|
|
|
|
|
K And R
|
Posted 6/19/2012 5:13:28 PM
|
|
Group: Moderators
Last Active: 2 hours ago
Posts: 10,085,
Visits: 36,532
|
Mac
Vauxhall reccomend a new actuator iirc.
"im doing this job at the weekend" oops, i bet you will need something you have not ordered.
Kev.
"If you dont KNOW how it works, don,t try to test or fix it"
|
|
|
|
|
mac123
|
Posted 6/19/2012 5:20:57 PM
|
|
Group: Forum Members
Last Active: 5/12/2013 11:01:18 AM
Posts: 135,
Visits: 480
|
kev
yes dealer did advise it when i ordered the manifold but i know a couple of people that have done them before and used the original one so not sure,lets hope all goes to plan with it being a weekend job
mac
|
|
|
|