BBA-Reman Forums



2004 vivaro 1.9 wiring

Posted By Stoksey25 Tuesday, July 02, 2019 2:37:09 PM
Add to Favorites0
Author Message
Stoksey25
 Posted Tuesday, July 02, 2019 2:37:09 PM
Saturday Job

Saturday Job - (7 reputation)Saturday Job - (7 reputation)Saturday Job - (7 reputation)Saturday Job - (7 reputation)Saturday Job - (7 reputation)Saturday Job - (7 reputation)Saturday Job - (7 reputation)Saturday Job - (7 reputation)Saturday Job - (7 reputation)

Group: Awaiting Activation
Last Active: Wednesday, July 03, 2019 5:25:03 PM
Posts: 5, Visits: 54
7
Hi all. I have had this van for over a year now and since I have had it drives good for an old van with just over 200k miles on it. It does not have any codes unless I ask full power in 4th or 5th for a little while when it goes into limp mode . I have changed map sensor . Maf sensor . Boost pressure sensor and waste gate actuator. Problem still happens . The other fault seems to be when I had it the preheated plugs were disconnected. It turned out that 2 had dead shorts . So I got all these working after finding the 70 amp fuse had gone . They all work now but never turn off so my question is. Do any of you got a diagram so I can check the continuity of the wiring loom in the engine bay as they have voltage enev with out the big relay plugged in.

Regards Neil
Iver
 Posted Tuesday, July 02, 2019 6:56:25 PM
Forum Tea Boy

Forum Tea Boy - (53 reputation)Forum Tea Boy - (53 reputation)Forum Tea Boy - (53 reputation)Forum Tea Boy - (53 reputation)Forum Tea Boy - (53 reputation)Forum Tea Boy - (53 reputation)Forum Tea Boy - (53 reputation)Forum Tea Boy - (53 reputation)Forum Tea Boy - (53 reputation)

Group: Awaiting Activation
Last Active: 7 hours ago
Posts: 32, Visits: 162
53
I have changed map sensor . Maf sensor . Boost pressure sensor and waste gate actuator. Problem still happens


These parts came from ?


Changing parts only makes the job harder



Reading This Topic

Expand / Collapse

Back To Top