|
Administrator
|
Posted 11/11/2003 11:21:55 AM
|
|
Group: Administrators
Last Active: 4/11/2010 8:02:24 AM
Posts: 5,658,
Visits: 1,366
|
i have a 1993 1.6 16v orion, when i turn on the ignition the fuel pump dosent run ( should be 1 sec prime) and will not run on cranking either!
have feed into the relay. but the earth from the relay to pin 22 on th eec remains at a constant 12v !!
have tried diff eec but still same !
any help much appreciated
This was added by a guest on the old forums
Books I'm currently reading:
http://www.connectviabooks.com/swany/currently
|
|
fast Paulo
|
Posted 11/15/2003 6:03:51 AM
|
|
Group: Forum Members
Last Active: 8/4/2005 12:00:00 AM
Posts: 4,
Visits: 1
|
this particular vehicle suffers from fuse box problems check this
our check the inertia switch its matches can go wrong
|
|
Administrator
|
Posted 11/15/2003 11:42:07 AM
|
|
Group: Administrators
Last Active: 4/11/2010 8:02:24 AM
Posts: 5,658,
Visits: 1,366
|
:
thanx for replying!
In case anyone else out there having similar problems, i have found the fault!
IMMOBILISER located on a metal plate behind the glove box, three rivets inside the glove box to remove the pull out from behoind dash.
Solder Joints go ’ dry ’ on these, simply re-solder ’dry’ joints on the relays n away ya go.
hope this is of help to someone
This was added by a guest on the old forums
Books I'm currently reading:
http://www.connectviabooks.com/swany/currently
|