|
crookie
|
Posted 5/16/2010 4:08:55 PM
|
|
Group: Forum Members
Last Active: 11/11/2011 11:52:50 AM
Posts: 39,
Visits: 181
|
hi my 2003 peugeot 206 wont start its the 1.1 petrol model, car turns over fine but car will just not start i think its a fuel problem either fuel pump itself or power to the fuel pump, i removed the fuel line that supplys the accumulator rail and cranked over car but no fuel was comming out, i have lifted rear seat to get access to the fuel pump itself and i cant hear or feel any movement of the pump when i turn ignition on or crank car over any help would be appreciated thanks crookie
5/19/2010 7:19:40 AM by
crookie
|
|
|
|
|
Robski
|
Posted 5/16/2010 4:13:05 PM
|
|
Group: Forum Members
Last Active: 2 hours ago
Posts: 1,971,
Visits: 17,957
|
C
welcome to the forum 
what engine code is it ?
has the inertia fuel cut off switch been activated ?
from memory i think it is near the N/S/F suspension leg top under the bonnet,if not someone will be along to correct me ?
Rob.
Scan it, Smoke it, Scope it....... Don't just poke & hope it © ™
5/16/2010 4:18:14 PM by
Robski
|
|
|
|
|
crookie
|
Posted 5/16/2010 4:39:07 PM
|
|
Group: Forum Members
Last Active: 11/11/2011 11:52:50 AM
Posts: 39,
Visits: 181
|
Hi rob thanks, it was the older model that had the fuel cut off switch so i know thats not the problem. Anymore help would be appreciated thanks crookie.
|
|
|
|
|
Robski
|
Posted 5/16/2010 4:57:34 PM
|
|
Group: Forum Members
Last Active: 2 hours ago
Posts: 1,971,
Visits: 17,957
|
C
have you checked for feed&earth at the pump end,if no inertia cut off switch check Fuse 2 in engine bay 1 fuse box ?
An engine code would possibly lead to the correct wiring diagram if i have it on AD/tolerance ?
Rob.
Scan it, Smoke it, Scope it....... Don't just poke & hope it © ™
5/16/2010 4:58:50 PM by
Robski
|
|
|
|
|
toddy
|
Posted 5/16/2010 5:19:07 PM
|
|
Group: Advanced Members
Last Active: 11/2/2012 12:33:24 PM
Posts: 240,
Visits: 684
|
hi,,did this fault just happen?
it does have fuel in it,yes??i say this as they suffer from gauge faults,bsi download cures.
as said tho check the fuses.
toddy
|
|
|
|
|
crookie
|
Posted 5/16/2010 5:20:44 PM
|
|
Group: Forum Members
Last Active: 11/11/2011 11:52:50 AM
Posts: 39,
Visits: 181
|
I've checked fuse 2 it's fine in the engine fuse box, I have a multi meter how do i check the feed to the pump. There are about 4 or 5 wires leading to the pump which ones do i check. Thanks crookie.
|
|
|
|
|
crookie
|
Posted 5/16/2010 5:25:25 PM
|
|
Group: Forum Members
Last Active: 11/11/2011 11:52:50 AM
Posts: 39,
Visits: 181
|
Hi toddy, fuse 2 had blown which is fuel pump fuse and have replaced it with a new one, the car has about quarter tank of fuel in it. Anymore help would be appreciated thanks crookie
|
|
|
|
|
toddy
|
Posted 5/16/2010 5:29:03 PM
|
|
Group: Advanced Members
Last Active: 11/2/2012 12:33:24 PM
Posts: 240,
Visits: 684
|
hi,,it HAS a quarter of a tank in it or it SHOWS a quarter of a tank????
like i say they suffered gauge faults,and can just happen.
just don't want you blinkered if all it needs is fuel,then a download.
the thicker wires are the pump live and earth.
toddy
|
|
|
|
|
crookie
|
Posted 5/16/2010 5:49:52 PM
|
|
Group: Forum Members
Last Active: 11/11/2011 11:52:50 AM
Posts: 39,
Visits: 181
|
no i put fuel in it so i know theres fuel there thanks
|
|
|
|
|
crookie
|
Posted 5/16/2010 8:40:08 PM
|
|
Group: Forum Members
Last Active: 11/11/2011 11:52:50 AM
Posts: 39,
Visits: 181
|
so the 2 thicker cables are the ones i should check?? how do i go about checking that powers getting to pump?? i have a multi meter for checking just not sure how to go about it cheers crookie
|
|
|
|